American Society for Testing and Materials (ASTM) - ValveDepot Reference Document
Number Explanation
A-48 This specification covers gray iron castings intended for general engineering use where tensile strength is a major consideration.
A-53 Covers seamless and welded black and galvanized steel Pipe furnished in the following types and grades:
Type F - furnace Butt Welded (also known as continuous Weld) 1/8 in. to 4 in. NPS Type E - Electric-Resistance Welded, Grades A and B 1/8 in.To 24 in. NPS Type S - Seamless, Grades A and B 1/8 in. to 26 in. NPS Except for Type F, pipe ordered to this specification is suitable For forming, bending, and flanging. Grade B, the most common, has a minimum yield of 35,000 psi. A-72 Welded wrought iron pipe in Std. XS, and XXS weights suitable for fabrication. More highly resistant to some types of corrosion than carbon steel, astm 72 is suited for protective
ciating such as galvanizing. Although highly resistant to vibration, wrought iron has a somewhat low tensile strength due to a low carbon content. A-105 This specification covers forged carbon steel piping components for ambient and higher temperature service in pressure systems. Included are flanges, fittings, valves
and similar parts ordered either to dimensions specified by the purchaser or to dimensional standards such as the ANSI and API specifications referenced in the full ASTM Specification. Forgings made to this specification are limited to a maximum weight of 10000 lb or 4540 kg. Larger forgings may be ordered to Specification A 266. Tubesheets and hollow cylindrical forgings for pressure vessel shells are not included within the scope of this specification. Although this specification covers some piping components machined from rolled bar and seamless tubular products, it does not cover raw material produced in these forms. A-106 Covers seamless only carbon steel pipe for high-temperature service. Furnished in one of three grades, A, B, or C. Suitable for bending, flanging, and similar forming operations.
A-126 This specification covers three classes of gray iron for castings intended for use as valve pressure retaining parts, threaded and flanged pipe fittings and flanges.
A-134 Covers electric-fusion-(arc)-welded straight seam or spiral Seam plate pipe 16 in. and over in diameter, with wall thicknesses up to 0.75 in. This pipe is intended for conveying
liquid, gas or vapour. A-135 Covers two grades of electric-resistance-welded steel pipe(A and B) 30 in. diameter and under. Pipe is intended for conveying liquid, gas or vapour; and only grade A is adapted
for flanging and bending. A-139 Covers five grades (A and E) of electric-fusion-(arc)-welded, Straight-seam, or spiral-seam steel pipe, 4 in. and over in Diameter with nominal wall thicknesses up to 1.00 in. Has
different mechanical properties than standard plate grades. Used for conveying liquid, gas or vapour. A-161 Covers seamless, hot finished and cold drawn, low carbon and carbon-molybdenum steel still tubes, for use in carrying fluids At elevated temperatures and pressures in various types of
Heaters. This specification includes tubes 2 to 9 in. O.D. Inclusive and over 0.220 in. in minimum wall thickness. A-178 Covers electric-resistance-welded tubes made of carbon steel And intended for use as boiler tubes and superheater flues. Includes tubes 1/2 in. to 5 in. O.D. and 0.035 to 0.320 in. in Minimum wall thickness.
A-179 Covers seamless cold drawn low carbon steel tubes for tubular head transfer apparatus. Includes sizes 1/8 to 3 in. O.D. inclusive.
A-181(M) Standard Specification for Carbon Steel Forgings for
General purpose piping
A-182 This specification covers forged low alloy and stainless steel piping components for use in pressure systems. Included are flanges, fittings, valves and similar parts
to specified dimensions or to dimensional standards such as the ANSI specifications referenced in the full ASTM Specifications. A-192 This specification supersedes A-83 and covers seamless carbon steel boiler and superheater tubes for high pressure service. Includes sizes 1/2 to 7 in. O.D. and 0.085 to 1.000
in. minimum wall thickness. A-197 This specification covers malleable irons for castings manufactured by the cupola process.
A-199 Covers several grades of chromium-molybdenum and chromium- molybdenum-cilicon seamless cold drawn intermediate alloy steel Tubes for head exchangers, condensers, and similar heat
transfer apparatus. Includes sizes 1/8 in. to 3 in. inclusive in O.D. A-200 Covers same grades as A-199 except use and size range varies. This specification covers sizes 2 to 9 in. in O.D. and wall thickness over 0.220 min.
A-203 This specification covers nickel-alloy steel plates intended primarily for welded pressure vessles. It covers five grades, A, B, D, E and F.
A-204 This specification covers molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels covering three grades, A, B and C.
A-209 Covers three grades of seamless carbon-molybdenum alloy steel Boiler and superheater tubes. Includes sizes 1.2 to 5 in. in O.D. and 0.035 to 0.500 in minimum wall thickness.
A-210 Covers seamless medium carbon steel boiler tubes and boiler flues including safe ends, arch and stay tubes, and superheater tubes. Includes sizes 1/2 to 5 in. in O.D. and 0.035 to 0.500 in. in minimum wall thickness.
A-211 Covers spiral welded steel or iron pipe 4 to 48 in. in diameter, and 0.0625 to 0.6875 in. in wall thickness. Intended for conveying liquid, gas, or vapour.
A-213 This specification covers minimum-wall-thickness, seamless ferritic and austenitic steel, boiler and superheater tubes and austenitic steel heat-exchanger tubes, designated
Grades T5, TP304, etc. These steels are referenced in the full ASTM Specification. A-216 This specification covers carbon steel castings for valves,flanges, fittings or other pressure-containing parts for high-temperature service and of quality suitable for
assembly with other castings or wrought-steel parts by fusion welding. The three grades included are WCA, WCB and WCC. A-217 This specification covers martensitic stainless steel and alloy steel castings for valves, flanges, fittings and other pressure-containing parts intended primarily for
high-temperature and corrosive service. The grades included in this specification are WC1, WC4, WC5, WC6, WC9, WC11, C5,C12 AND CA15.
A-230 Standard specification for steel wire oil - tempered carbon valve spring quality
A-232 Standard specification for chromium - vanadiun alloy steel valve spring quality
A-234 This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the lastes revision of ANSI B 16.9, ANSI B 16.11, ANSI B 16.28, MSS-SP79 and MSS-SP95. These fittings are for use in pressure piping and in pressure vessel fabrication for service at moderate and elevated temperatures. Fittings differing from these ANSI and MSS standards shallbe identified with the marking "S9".
A-240 This specification covers chromium, chromium-nickel and chromium-manganese-nickel stainless and heat-resisting steel plate, sheet and strip for pressure vessels.
A-249 This specification covers nominal-wall-thickness welded tubes made from the austenitic steels, referenced in the full ASTM Specification, with various grades intended
for such use as boiler, superheater, or condenser tubes. A-252 Covers welded and seamless steel pipe for piling application or Permanent load carrying member. Available in Grades 1, 2 and 3 To meet physical properties as required.
A-269 This specification covers grades of nominal-wall-thickness,stainless steel tubing for general corrosion-resisting and low or high-temperature service, as referenced in the full ASTM Specification.
A-276 Standard Specification for Stainless Steel bars and Shapes
A-278 This specification covers gray iron for castings suitablefor pressure-containing parts for use at temperatures up to 650F.
A-297 This specification covers iron-chromium and iron-chromium-nickel alloy castings for heat-resistant service.
A-311 Covers stress-relieved cold-drawn carbon steel bars produced To mechanical property requirements. On class, B, is cold-drawn with higher than normal (heavy) drafts to provide higher strength levels.
A-312 This specification covers seamless and straight-seam welded austenitic steel pipe intended for high-tempurature and general corrosive service.
A-333 Covers nominal wall seamless and welded carbon and alloy steel pipe intended for low temperature service. (-50 to -320F). Several grades are covered including Grades 1, 3, 4, 6, 7, 8,
and 9. A-334 Covers six grades of seamless or welded carbon and alloy steel tubes intended for use at low temperatures (-50 to -320F).
A-335 Covers nominal wall seamless alloy steel pipe intended for high temperature service. Pipe ordered to this specification shall be suitable for bending, flanging, and similar forming
operations, and for fusion welding. Selection will depend upon design, service conditions, mechanical properties, and high temperature characteristics. This specification covers twelve grades, most common of which are Grades 1,5 7, 9, 11 and 22. A-338 This specification covers malleable iron flanges, pipe fittings and valve parts, including parts to be assembled for use in railroad, marine and other heavy duty service applications
where fittings furnished in accordance American National Standard for Malleable Iron Threaded Fittings, Class 150 and 300 (ANSI B16.3) are not considered adequate. A-350 This specification covers several grades of carbon and low-alloy steel forged or ring-rolled flanges, forged fittings and valve intended primarily for low-temperature service and requiring notch toughness testing. They are made to specified dimensions, or to dimensional standards, such as the ANSI and API specifications referenced in the full ASTM Specification.
Although this specification covers come piping components machined from rolled bar and seamless tubular materials.It does not cover raw material produced in these product forms. A-351 This specification covers austenitic and austenitic-ferritic(duplex) steel castings for valves, fittings and other pressure-containing parts. Grades included in this specification are CF3, CF8, CF3M, CF8M, CF3MN and so on.
A-352 This specification covers steel castings for valves, flanges, fittings and other pressure-containing parts intended primarily for low-temperature service. This specification
contains the following grades LCA, LCB, LCC, LC1, LC2, LC2-1, LC3, LC4, LC9 and CA6NM. A-358 This specification covers electric-fusion-welded austenitic chromium-nickel alloy steel pipe suitable for corrosive or high-temperature service, or both. (Although no restrictions are placed on the sizes of pipe which may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8).
A-387 This specification covers chromium-molybdenum alloy steel plates intended primarily for welded boilers and pressure vessels designed for elevated temperature service. It covers the following grades, 2, 5, 9, 11, 12, 21, 21L, 22, 22L and 91.
A-403 This specification covers two general classes, WP and CR, of wrought austeitic stainless steel fittings of seamless and welded construction covered by the lastest revision of ANSI B 16.9, ANSI B 16.11, ANSI B 16.28, MSS-SP79 and MSS-SP95. Fittings differing from these ANSI and MSS standards shall be identified with the marking "S9".
A-404 Standards specification for
forged or rolled alloy - steel pipe flanges forged fittings and valves and
parts specially heat treated for high temperature service
A-405 Covers on grade (P-24) of seamless ferritic alloy-steel pipe specially heated treated for high temperature service.
A-420 This specification covers wrought carbon steel and alloy steel fittings of seamless and welded construction covered by the lastest revision of ANSI B 16.9, ANSI B 16.11, ANSI B 16.28, MSS-SP79 and MSS-SP95. Fittings differing from these ANSI and MSS standards shall be identified with the marking "S6". These fittings are for use in pressure piping and pressure vessel service at low temperatures.
A-500 Covers cold formed welded and seamless carbon square, rectangular, or special shape structural tubing for general structural purposes. Covers three grades:
Grade A - 39,000 psi Min. Yield Grade B - 46,000 psi Min. Yield Grade C - 50,000 psi Min. Yield A-501 Covers hot formed welded and seamless carbon steel, rectangular, square, or special shape tubing for general structural purposes.
A-512 This specification covers cold-drawn buttweld carbon steel tubes for use as mechanical tubing. It covers round, square, rectangular, and special shapes. Common grades in warehouse
stock are 1010, 1015, and 1020. A-513 This specification covers electric-resistance welded carbon and alloy steel tubing for use as mechanical tubing. It covers round, square, rectangular, and special shapes made
from hot or cold rolled steel. It covers "as welded," "sink drawn," "mandrel drawn," and "special smooth inside diameter." A-519 This specification covers a multitude of grades of carbon and alloy steel seamless mechanical tubing. It covers both hot finished and cold drawn tubing up to and including
12-3/4 in. outside diameter with wall thickness as required.
A-522 Forged or rolled 8% and 9%
nickel alloy steel flanges fittings valves and parts for low - temperature
service
A-524 Covers seamless carbon steel pipe for process piping applications. Suitable for welding, bending, flanging, and similar forming operations. Two grades are covered: Grade I
(0.375 in. wall thickness and under) and Grade II (greater than 0.375 in. wall thickness).
A-564 Standard Specification for
Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel bars and Shapes.
A-569 Standard specification for
forgings carbon and alloy steel for pipe flanges fittings valves and parts for
high - pressure transmission service
A-618 Covers three grades of hot-formed welded and seamless high-strength low-alloy square, rectangular, round or special shape tubing for use in bridge or building construction and general structural purposes.
A-671 Covers electric-fusion-welded steel pipe with filler metal added, fabricated from pressure vessel quality plate of several analyses and strength levels and suitable for service
at atmospheric and lower temperatures. A-672 Covers electric-fusion-welded steel pipe with filler metal added, fabricated from pressure vessel quality plate of several analyses and strength levels and suitable for
high-pressure service at moderate temperatures. A-691 Covers electric-fusion-welded carbon and alloy steel pipe with filler metal added, fabricated from pressure vessel quality plate of several analyses and strength levels and
suitable for high-pressure service at high temperatures. A-727 Standard specification for carbon steel forgings for piping components with inherent notch toughness
A-961 Standard Specification for Common Requirements for Steel
Flanges, Forged Fittings, valves, and Parts for Piping Applications
|
B61 |
Standard Specification for Steam or Valve
Bronze Castings. |
|
B62 |
Standard Specification for Composition Bronze
or Ounce Metal Castings |
B-75 This specification covers seamless copper, round and rectagular, including square tube suitable for general engineering purposes.
B-75 This specification covers Copper UNS No. C12200 seamless copper water tube suitable for general plumbing,and similar applications for the conveyance of fluids, and
commonly used with solder, flared, or compression type fittings.
B-98 Standard Specification for Copper-Silicon Alloy Rod, bar, and Shapes.
B-127 This specification covers rolled nickel-copper alloy (UNS04400) plate, sheet and strip.
B-139 Standard Specification for Phosphor Bronze Rod, bar, and Shapes
B-160 This specification covers nickel (UNS N02200) and low carbon nickel (UNS N02201) in the form of hot-worked and cold-worked rod and bar.
B-161 This specification covers nickel (UNS N02200) and low- carbon nickel (UNS N02201) in the form of cold-worked seamless pipe and tube.
B-162 This specification covers rolled nickel (UNS N02200) and low-carbon nickel (UNS N02201) plate, sheet and strip.
B-163 This specification covers seamless tubes of nickel and nickel alloys for use in condenser and heat-exchanger service. Please see the appropriate ASTM specification
for all the alloys covered by this specification. B-164 This specification covers nickel-copper alloys (UNS N04400 and N04405), in the form of hot-worked and cold-worked rod and bar and cold-worked wire.
B-165 This specification covers nickel-copper alloy (UNS N04400), in the form of cold-worked seamless pipe and tube.
B-166 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum alloy (UNS N06617)
in the form of hot-finished and cold-worked rounds, squares, hexagons, rectangles and cold-worked wire. B-167 This specification covers nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) in cold-worked annealed, hot-worked annealed and hot-
finished seamless pipe and tube intent for general corrosion resistant and heat resistant applications. B-168 This specification covers rolled nickel-chromium-iron alloys (UNS N06600, N06601, N06690, N06025 and N06045) and nickel-chromium-cobalt-molybdenum alloy
(UNS N06617) plate, sheet and strip. B-194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled bar
B-210 This specification covers aluminum and aluminum-alloy drawn seamless tubes in straight lengths and coils for general purpose and pressure applications in various alloys, tempers and thicknesses. Coiled tubes are generally available only as round tubes with a wall thickness not exceeding 0.083 in. and only in nonheat-treatable alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-221 This specification covers aluminum and aluminum alloy extruded bar, rod, wire, shape and tube in aluminum-alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-234 This specification covers aluminum-alloy drawn seamless round tube in straight lengths designated for use in surface condensers, evaporators and heat exchangers. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-241 This specification covers aluminum and aluminum-alloy seamless pipe and extruded round seamless tube in various alloys and tempers intended for pressure applications. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-247 This specification covers aluminum-alloy die forgings, hand forgings and rolled ring forgings. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-361 This specification covers only factory-made wrought aluminum and aluminum-alloy welding fittings in contrast to field-made fittings. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-366 This specification covers wrought welding fittings for pressure piping, factory-made from nickel and nickel alloys. The term welding applies to butt-weld or socket-welding parts such as 45 and 90 elbows, 180 bends, caps, tees, reducers, lap-joint stub ends and other types, as covered by ANSI B 16.9, ANSI B 16.11, ANSI B 16.28 and MSS-SP43.
B-407 This specification covers UNS N08800, N08801, N08810 and N08811 in the form of cold-worked and hot finished annealed seamless pipe and tube. Alloy UNS N08800 is normally employed in service up to and including 1100F. Alloys UNS N08810 and N08811 are normally employed in service temperatures above 1100F where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in the temperature range.
B-408 This specification covers UNS N08800, N08801, N08810 and N08811 in the form of cold-worked and cold-worked rod and bar. Alloy UNS N08800 is normally employed in service up to and including 1100F. Alloys UNS N08810 and N08811 are normally employed in service temperatures above 1100F where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in the temperature range.
B-409 This specification covers UNS N08800, UNS N08810 and UNS N08811 in the form of rolled plate, sheet and strip. Alloy UNS N08800 is normally employed in service temperatures up to and including 1100 F or 593 C. Alloys UNS N08810 and UNS N08811 are nomally empolyed in service temperatures above 1100 F or 593 C, where resistance to creep and rupture is required, and they are annealed to develop controlled grain size for optimum properties in this temperature range.
B-462 This specification covers forged or rolled UNS N08020, UNS N08024, UNS N08026, and UNS N08367 pipe flanges, forged fittings and valves and parts intended for corrosive high-temperature service.
B-463 This specification covers UNS N08020, UNS N08026 and UNS N08024 alloy plate, sheet and strip.
B-464 This specification covers welded UNS N08020, UNS N08024 and UNS N08026 alloy pipe for general corrosion-resisting and low or high-temperature service.
B-468 This specification covers welded UNS N08020, UNS N08024 and UNS N08026 alloy boiler, heat exchanger and condenser tubes for general corrosion-resisting and low or high-temperature service.
B-474 This specification covers electric fusion welded UNS N08020, UNS N08026 and UNS N08024 alloy pipe suitable for high-temperature or corrosive service. (Although no restrictions are placed on the sizes of pipe that may be furnished under this specification, commercial practice is commonly limited to sizes not less than NPS 8).
B-483 This specification covers aluminum and aluminum-alloy drawn tubes in straight lengths and coils for general purpose applications in various alloys. Please see the appropriate ASTM specification for all the alloys covered by this specification.
B-574 This specification covers rod of low-carbon nickel-molybdenum-chromium alloys, (UNS N10276, N06022 and N06455), low-carbon nickel-chromium-molybdenum alloy(UNS N06059),and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) for use in general corrosive service.
B-575 This specification covers plate, sheet and strip of low-carbon nickel-molybdenum-chromium alloys, (UNS N10276, N06022 and N06455), low-carbon nickel-chromium-molybdenum alloy (UNS N06059),and low-carbon nickel-chromium-molybdenum-tungsten alloy (UNS N06686) for use in general corrosive service.
B-584 Standard Specification for Copper Alloy Sand Castings for General Applications
B-587 This specification covers round, rectangular, and square-welded copper-alloy tube for general engineering purposes.
B-619 This specification covers welded pipe of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686).
B-622 This specification covers seamless pipe and tube of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686).
B-626 This specification covers welded tube of nickel and nickel-colbalt alloys (UNS N10001, N10665, N12160, N10629, N10675, N10276, N06455, N06007, N06975, N08320, N06002, N06022, N06059, N06230 and N06686).
B-729 This specification covers UNS N08020, UNS N08026 and UNS N08024 seamless, cold-worked pipe and tube intended for general corrosive service.
|
B834 |
Standard
Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-
Chromium-Molybdenum (UNS N08367) and Nickel- Chromiiim-molybdenumColumbium
(Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts |
|
D429 |
Test
Methods for Rubber Property-Adhesion to Rigid Substrates. |
|
D1784 |
Standard
Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated
Poly (Vinyl Chloride) (CPVC) Compounds |
|
D1785 |
PVC SCHED. 40 & 80 PIPE SPECS. |
|
|
D2464 |
PVC SCHED. 80 THREADED FITTINGs |
|
|
D2466 |
PVC SCHED. 40 SOCKET SPECS. |
|
|
D2467 |
PVC SCHED. 80 SOCKET SPECS. |
|
|
D2564 |
PVC SOLVENT CEMENTS |
|
|
|
PVC SOLVENT CEMENTED JOINTS |
|
|
D5500 |
Standard Test Method for Vehicle Evaluation of Unleaded
Automative Spark-ignition Engine Fuel for Intake Valve Deposit Formation |
|
|
F-439 |
CPVC SCHED. 80 SOCKET FITTINGS |
|
|
F-441 |
CPVC SCHED. 80 PIPE SPECIFICATIONS |
|
|
F-493 |
CPVC SOLVENT CEMENTS |
|
|
F885 |
Standard
Specification for Envelope Dimensions for Bronze Globe Valves NPS 1/4 to 2
El-1996 R(1996) |
||
|
F992 |
Standard
Specification for Valve Label Plates El-1997 R(1997) |
||
|
F993 |
Standard
Specification for Valve Locking Devices El-1997 R(1997) |
||
|
F1020 |
Standard
Specification for Line-Blind Valves for marine Applications El-1996 RI'1996) |
||
|
F1098 |
Standard
Specification for Envelope Dimensions for Butterfly Valves - NPS 2 to 24
EI-1993 R(1993) |
||
|
F1271 |
Standard
Specification for Spill Valves for Use in Marine Tank Liquid Overpressure
Protections Applications EI-1995 R (1995) |
||
|
F1370 |
Standard
Specification for Pressure-Eeducing valves for Water Systems, Shipboard |
||
|
F1508 |
Standard
Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and
Liquid Services |
||
|
F1565 |
Standard
Specification for Pressure-Reducing Valves for Steam Service |
||
|
F1792 |
Standard
Specification for Special Requirements for Valves Used in Gaseous Oxygen
Service |
||
|
F1793 |
Standard
Specification for Automatic Shut-Off Valves (Also Known as Excess Flow
Valves, EFV) for Air or Nitrogen Service |
||
|
F1794 |
Standard
Specification for Hand-perated, Globe-Style Valves for Gas (Except Oxygen
Gas), and Hydraulic Systems |
||
|
F1795 |
standard
Specification for Pressure-Reducing Valves for Air or Nitrogen Systems |
||
Copyright 2003 by ValveDepot