 |
|
 |
Pressure reducing valve can prevent pipeline |
 |
The pressure reducing valve uses a
sub-valve (pressure reducing pilot valve) to control the main valve. When the outlet pressure reaches the setting rang of pressure reducing pilot valve , the pilot valve will automatically sense the outlet pressure and adjust the pressure chamber pressure in the main valve, so the valve gate can be opened and consequently the outlet pressure can be maintained. ‧Adjustment Range : 0.2kgf/cm2 ～7kgf/cm2 ‧Special orders can be arranged for higher pressure adjusting range. ‧In the case of high pressure, valve body made by stainless steel is recommended. | |
‧The pressure gauge on the pilot valve indicates the pressure in outlet. The indicating value will be lower when the outlet is in open state. ‧When large flow rate is implemented in outlet, or when the gate is switching off rapidly and waiting the response of pilot valve to close the main valve gate, delayed response might happen. At this time the outlet pressure will rise a little, and a small pressure relief valve can be added to the outlet. | ||
 ‧Special order is needed for size over 14" or particular dimension. ‧Please refer to MULTI-FUNCTION AUTO- CONTROL VALVESfor valve body material, working pressure and flow. |
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
■about us
■Pressure reducing valve set
■Full open style silent
check valve
■Water piping illustration
| ■MULTI-FUNCTION
AUTO- CONTROL VALVES ●Pressure Reducing Valve ●Pressure Sustaining Valve ●Pressure Relief Valve ●Solenoid Control Valve ●Float Valve ●Direct-Activated Pressure Reducing Valve |
| ■WATER
HAMMER ARRESTERS ●L style water hammer arrester ●I style water hammer arrester ●T style water hammer arrester ●Angle valve style water hammer arresster |